UTG-1000 超声波壁厚计
Ultrasonic Thickness Gauge
   
Model No. UTG-1000

The PHASE II UTG-1000 is a hand held microprocessor controlled Thickness Gauge specifically designed for measuring the Thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. With uses in many areas of industry, the UTG-1000 can perform precise thickness measurements on various types of raw materials, component parts and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.

The UTG-1000 Ultrasonic Thickness Gauge is extremely easy to use. After a simple calibration to a known Thickness or sound velocity, the gauge will give accurate readings in millimeters. Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory.
 
ultrasonic thickness gauges portable
Ultrasonic Wall Thickness Gauge Measurement


The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001".

Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested.

A broad variety of piezoelectric transducers, operating at given frequencies are utilized to generate sound when excited. Typically, a 5mhz frequency is standard on all Phase II Ultrasonic Thickness Gauges. Optional transducers are always available for a myriad of applications.

The direct contact method of pulse/echo type ultrasonic thickness gauges requires use of a couplant. Propylene Glycol is common, but many other substances can be used.

Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC's, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications.

Technical Specifications

Display type 4-digit LCD
Minimum display unit 0.1mm
Measuring range 0.04-8in. (1.0mm-225mm) in steel w/standard probe(Other &#118alues depending on material)
Lower limit steel pipes Min. diameter 0.8in. X 0.1in. (20mm x 3mm
Display accuracy +-0.1mm
Sound velocity range 3280-32805 ft/s (1000-9999m/s)
Operating temperature 32-122 degrees F (-5 - 40 degrees C)
Frequency 5MHz
Update range 4Hz
Power supply 1.5v AA alkaline batteries (2pc)
Battery life Approx. 250 hours / battery set
Dimensions 4.9 x 2.6 x 0.9in. (126 x 68 x 23mm)
Weight 0.4lbs (0.17kg)
Operating current <20mA (3V)


Table of sound velocity of various materials

Material Sound velocity (m/s)
Aluminum 6260
Iron 5900
Copper 4700
Brass 4640
Zinc 4170
Silver 3600
Gold 3240
Tin 3230
Glass 2350
  • Automatic shut off
  • Stores up to 5 velocities of sound
  • Automatic zeroing
  • Rapid review of stored test data
  • Low battery voltage indicator
The UTG-1000 Ultrasonic Thickness Gauge comes complete with compact durable case, probe, coupling gel and operations manual.


Model No. UTG-2000

State of the art, digital Ultrasonic Thickness Gauges are menu driven, multi-functional units offering everything from the basic measurement to extended memory and RS 232 output capabilities. This dynamic series of gauges are designed to measure the Thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good Ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2000 series gauges will accurately display readings in either inch or millimeter after a simple calibration to a known Thickness or sound velocity.

Dynamic series of gauges give you the ultimate choice in Ultrasonic Thickness Measuring!

Performance parameters

Display type 4-digit LCD
Minimum display unit 0.01"/0.01mm
Measuring Range 0.04-8.0" in steel w/standard probe
Display accuracy 0.001"/0.01mm
Sound velocity range 3280-32805 ft/s (1000-9999m/s)
Operating temperature 32-122 degrees F
Frequency 5MHz
Update range 4Hz
Power supply 1.5v AAA alkaline batteries (2pc)
Battery life Approx. 250 hours/set
Power consumption Working current is less than 3V
Dimensions 4-1/4 x 2-3/8 x 1"
Weight 4.7oz


  • Standard unit has measuring capabilities only
  • Standard unit incorporates vast memory functions, mini-printer, PC cable, charger, and operations manual
  • All Ultrasonic Gauges come complete with custom carry case

  • >> 关闭
    首 页  |  关于我们  |  代理公司  |  产品中心  |  新闻中心  |  联系我们
    Copyright 2019 © East Wonder International, Inc. All rights reserved.
    TR-220 | T-30D | AC30-60 | NDT | LG-030 | 张力表 | 飞机称重板 | 无损探伤 | 大气数据测试仪 | 飞机千斤顶